1000ml · custom tumbler
1000ml Leakproof Tumbler with Dual-Drink Lid & Steel Straw
For buyers comparing leak proof tumblers, this 1000ml handled model provides a sealed dual-drink lid with a direct-sip opening and reusable stainless steel straw. Its wide mouth and removable lid parts make cleaning access straightforward for custom retail and promotional programs.
- 1-liter capacity
- 500 pcs per color
- Direct sip + steel straw
- 30 pcs per carton
- Interior construction
- 316 base / 304 inner wall
- Exterior
- 201 stainless steel
- Cleaning
- Wide mouth and removable lid parts
- Customization
- Logo and color options
Fit note: The tapered base is designed for compatible car cup holders. Confirm opening diameter, depth and handle clearance with a sample for your target vehicle.
Everyday drink choice
Two drinking modes in one sealed lid
The tumbler supports direct sipping through the lid and straw drinking with the included stainless steel straw. The silicone tip is removable for cleaning. For a bulk program, check both drinking modes, lid fit and the required leak test on the approved sample.
Sealed lid
A leakproof design for the intended closed configuration; define the test position and duration before approving production.
Wide opening
The removable lid exposes the interior for filling, ice and routine hand-cleaning access.
Vehicle-ready shape
The narrowed lower body suits compatible cup holders; measure the target holder and handle clearance before ordering.
Cleanable components
Take apart the lid and straw for a closer clean
The wide mouth lets users reach inside the stainless steel body. The clear lid, straw and silicone tip can be separated for routine cleaning and inspection. Ask for a sample if your program has a defined cleaning process; no dishwasher rating has been supplied.
- Clear removable lid
- Stainless steel straw with silicone tip
- Wide opening for access to the interior
Use on the road
Check fit in the target vehicle
The lower body tapers toward the base and is shown in a vehicle cup holder. The supplier has not separately confirmed the base diameter; the 9cm figure in the specification has no stated measurement point. Verify the holder opening, depth and handle space using an approved sample.
Product data
1000ml tumbler specifications
Use the supplier-reported dimensions and packing figures for initial RFQ planning, then confirm component inclusions and measurement points on the sample and final packing sheet.
- Capacity
- 1000ml / 1 liter
- Material construction
- 316 stainless steel interior base, 304 stainless steel inner wall and 201 stainless steel exterior
- Product size
- 9 × 23.6cm (measurement points to confirm)
- Unit weight
- 435g (included components to confirm)
- Color box
- 13.1 × 10.2 × 25.5cm
- Carton size
- 53.5 × 41.5 × 53cm
- Carton quantity
- 30 pcs
- Carton net / gross weight
- Supplier-reported 13kg / 15kg
- MOQ
- 500 pcs per color
- Colors
- White, pink, green, black and silver
- Customization
- Logo and color options
- Drinking modes
- Direct sip or reusable steel straw with silicone tip
Material construction
Specify each stainless steel layer separately
This model uses a 316 stainless steel interior base, a 304 inner wall and a 201 exterior. The 316L label in the detail image does not describe the confirmed production grade. Specify 316 for the interior base in your order documents.
Custom order planning
Build the cup around your brand colors and artwork
Choose the body, handle and lid colors for a coordinated range, then set the logo position and color-box details on the approval sample. The minimum order is 500 pieces per color. Review customization, manufacturing and quality control before placing a bulk order.
- Artwork and logo position
- Body, handle and lid colors
- Quantity per color
- Leak test and cleaning criteria
- Color-box and carton markings
For which lids seal and how to test them, see leak proof tumblers.
Buyer questions
Confirm the details before sampling
What is the MOQ for this 1000ml tumbler?
The MOQ is 500 pieces per color. If you need an assortment, list the desired body, handle and lid colors and the quantity of each color in your RFQ. Logo and packaging requirements can be reviewed with the sample.
How does the dual-drink lid work?
The lid provides a direct-sip option and a straw route for the included stainless steel straw. The straw has a removable silicone tip. Check both modes and the closed configuration on a sample, particularly if your program requires a defined leak-resistance test.
Is the tumbler suitable for a car cup holder?
Its lower body is tapered and the product is pictured in a car cup holder. Cup holders vary, and the supplied 9cm size does not identify the base diameter. Check the holder opening, depth and handle clearance with an approved sample before claiming fit for a vehicle range.
Which parts can be removed for cleaning?
The clear lid, straw and silicone tip are removable, and the wide mouth gives access to the cup interior. The stainless steel body itself is not described as disassemblable. No dishwasher rating has been supplied, so agree on the cleaning method during sample approval.
How should the material and weight figures be confirmed?
This model uses a 316 stainless steel interior base, a 304 inner wall and a 201 exterior. The detail image’s 316L label is not the production specification. The stated unit weight is 435g; carton net and gross weights are 13kg and 15kg for 30 pieces. Confirm included components and the packing-weight basis on the final specification.
Request a production proposal
Send your color plan and target-use requirements
Share quantities by color, logo artwork, packaging, target market, cup-holder fit dimensions and the leak-test conditions you need. These details make the sampling and quotation brief easier to confirm.
MOQ 500 pieces per color. Final material grades, leak performance, fit and packing figures follow the approved sample and order specification.
