Two sizes · one compact range
350ml & 450ml Small Stainless Steel Water Bottle with Safety Lock
A push-button lid, safety lock and silicone base bring practical details to a compact bottle range. Choose 350ml or 450ml, then plan the colors and logo for your sport or gift collection.
- 350ml / 450ml
- 500 pcs per color, per capacity
- Push-button opening
- Silicone base pad
- Inner layer
- 304 stainless steel
- Outer layer
- 201 stainless steel
- Lid
- Flip top with safety lock
- Customization
- Logo and color requirements
Order by size and color: Each capacity and color combination has its own 500-piece minimum. List both separately in your inquiry.
Start with the capacity
Two ways to keep it compact.
Choose the size around your intended fill volume and carry routine. Both versions share the push-button opening, safety lock and silicone base; confirm finished dimensions on the selected sample.
350ml
For a smaller fill
The lower-capacity option suits a smaller fill volume. For a 350ml leakproof water bottle order, agree the closed-lid sealing check alongside your artwork approval.
450ml
A little more capacity
Add 100ml within the same design family. Offer a second size with the same lid style and coordinated branding.
One button
Open for the next sip
Press to release the lid, then close it fully and engage the safety lock for carrying.
Open · close · carry
A button for opening. A lock for carrying.
Press the button to release the flip-top lid. Engage the safety lock when carrying the closed bottle; the lock helps prevent accidental opening and does not replace correct lid assembly.
- Push-button release for the flip-top lid
- Safety lock for the fully closed lid
- Compact cylindrical bottle body
Check button travel, opening action and locking feel on your chosen sample.
Details at the opening and base
A sealed closure above. Silicone grip below.
The leak-resistant design relies on a correctly assembled, fully closed lid. Confirm the fill level and carrying or inversion test conditions for your order.
A silicone pad adds grip at the base when the bottle is placed down. Keep the contact surface clean for everyday use.
Inside, the 304 stainless steel layer pairs with a 201 stainless steel exterior. Explore our stainless steel drinkware range for other formats.
Shared product data
One range. Clear ordering details.
Use the confirmed capacities, material grades and minimum quantities to plan the range. Capacity-specific measurements are confirmed with the selected sample and packing plan.
- Available capacities
- 350ml and 450ml
- Inner material
- 304 stainless steel
- Outer material
- 201 stainless steel
- Lid
- Push-button flip top with safety lock
- Base
- Silicone anti-slip pad
- MOQ
- 500 pcs per color, per capacity
- Packing quantity
- 50 pcs per carton
- Customization
- Logo and color requirements reviewed with your order
Build a coordinated gift range
Set the color. Place the logo. Choose the size.
For promotional water bottles with logo, start with the capacity mix and body color. The pictured cream, teal, black and light blue bottles show color directions; confirm your finish and logo position through a sample.
Discuss artwork and color requirements with our drinkware customization team. The range can sit within a gift cup collection or alongside other sport bottles.
- 350ml and/or 450ml, with quantities for each color
- Body and lid color requirements
- Logo artwork, placement and preferred appearance
- Gift presentation or packaging requirements
- Destination and required delivery date
Review the manufacturing process and quality checks when preparing the order specification.
For how flip-top lids and safety locks work, see flip-top water bottles.
Before you order
Questions about this range
Can I order both capacities in the same color?
Yes. The minimum is 500 pieces for each color and each capacity. Ordering one color in both 350ml and 450ml starts at 1,000 pieces in total. Adding another color creates a separate combination with its own minimum.
How does the lid open and lock?
The button releases the flip-top lid. Close the lid fully and engage the safety lock for carrying. Confirm the locking action and lid fit on the approved sample.
What should I check for leak resistance?
Check the lid assembly, closure and seal on the final sample. Agree fill level and carrying or inversion test conditions with your order; the safety lock helps prevent accidental opening but is not a substitute for a correct seal.
Can the logo and color be customized?
Yes. Send your artwork, color requirements and selected capacity. Logo appearance and placement are reviewed before bulk production.
Does the bottle have an anti-slip base?
Yes. The silicone base pad adds grip at the contact surface. The detail image shows the pad on the bottle bottom.
Your next small-bottle range
Send the capacity mix and artwork.
Tell us how many bottles you need in each size and color, then include your logo and destination. We can review the selected configuration and prepare a quotation.
MOQ: 500 pcs per color, per capacity. Final measurements, packing and schedule follow the approved order configuration.
