Image 1 of 7
Custom stainless steel drinkware
20 oz Blank Straight Sublimation Tumbler with Clear Lid
This 20 oz blank straight sublimation tumbler is available as a white blank for your own heat-transfer artwork or with custom decoration. Its slim, rounded steel body pairs with a removable clear lid; a stainless steel straw can be added to the order.
- 20oz
- White blank option
- Clear removable lid
- MOQ
- 300 pcs
- Steel body
- 304 inner / 201 outer
- Cup height
- 20.4cm, excluding lid
- Base diameter
- 6.8cm
Choose the white blank or your finished artwork, then confirm the lid, optional straw and 25- or 50-piece carton configuration.
Your artwork, your finish
Start with a white sublimation blank
The white blank option lets a transfer-printing business add its own designs to the cup. Specify the sublimation-ready surface when ordering and review the artwork area on a sample before applying a full wrap.
The color and printed cups shown are sample presentations. Confirm the finish separately; their appearance does not mean every surface uses the same coating or transfer settings. See our dye sublimation options for the order discussion.
Remove and wash
A clear lid and accessible cup interior
Remove the lid and optional straw to reach the cup interior and separate the removable lid components for washing. The rounded steel body uses a drawn 304 inner liner and 201 exterior.
Refit the seal and close every opening for the intended closed configuration. The straw setup shown is a drinking configuration, rather than a sealed transport state. Confirm any required leak check during sampling.
Slim body for everyday use
Check the cup holder against the 6.8cm base
The cup is designed for car cup-holder use, with a 6.8cm base diameter and no large side handle. Compare the holder opening and depth with the sample before specifying fit for a vehicle range.
Explore the stainless steel drinkware range when comparing other shapes or lid configurations.
Product and packing
20oz cup specifications
The cup-only, lidded and boxed weights use different component counts. Keep them separate when reviewing the accessory set and shipping brief.
- Capacity
- 20oz
- Steel construction
- 304 inner wall; 201 exterior
- Inner construction
- Drawn stainless steel liner
- Minimum order
- 300 pcs
- Blank option
- White blank suitable for customer sublimation printing
- Lid
- Removable clear lid with seal and sliding closure
- Straw
- Optional stainless steel straw
- Cup height, excluding lid
- 20.4cm
- Mouth diameter
- 7.4cm
- Base diameter
- 6.8cm
- Cup only
- 260g
- Cup + lid
- 283g
- Cup + lid + box
- 337g
- Individual packaging
- White box; dimensions not supplied
- Cleaning
- Removable components; open cup interior for washing
Two carton configurations
| Quantity | Carton size | Gross weight |
|---|---|---|
| 25 pieces | 42 × 42 × 24.5cm | 9.3kg |
| 50 pieces | 42 × 42 × 46cm | 18kg |
The optional steel straw is not separately identified in the stated weights. Individual white-box dimensions and carton net weights have not been supplied. Confirm the complete set and final packing layout on the approved sample.
Plan your cup program
White blanks or finished custom artwork
Send quantities per color and tell us whether your team will print the white blanks or needs finished decoration. Include the design file, lid and optional straw requirements, packaging artwork and destination market in the same brief.
Review customization, the manufacturing process and quality checks before approving the final order specification.
For wrap planning, read the sublimated tumbler and full-wrap printing guide.
Buyer questions
Details to confirm before sampling
Can I order a white blank for my own sublimation printing?
Yes. A sublimation-ready white blank is available for customers who apply their own heat-transfer artwork. Specify this version in your enquiry, rather than selecting a colored or finished printed sample by appearance alone. Confirm the coating, artwork area and transfer setup on your sample before processing a batch.
What is the MOQ?
The minimum order is 300 pieces. Send the required quantities by color and state whether you need white blanks or finished custom artwork. Include the lid, optional straw and packing configuration so the quotation covers the combination you intend to order.
Is a stainless steel straw included?
A stainless steel straw can be supplied as an option. The photos show this accessory with the clear lid, but it is not described as standard for every order. List the straw requirement in your brief and confirm its dimensions and packing with the sample.
Is the clear lid leakproof?
Leak prevention depends on the lid and seal being correctly fitted and all drinking openings being fully closed. A straw inserted through the lid leaves an open drinking route. Confirm the required closed configuration and leak-check conditions on the sample before approving the cup for transport.
Will the tumbler fit a car cup holder?
The cup has a stated base diameter of 6.8cm and is designed for car cup-holder use. Check the actual holder opening and depth against the sample; the cup is 20.4cm high without its lid and 7.4cm across its mouth. These dimensions do not establish universal fit for every vehicle.
How do the three weight figures differ?
The supplied figures are 260g for the cup alone, 283g for the cup with its lid, and 337g for the cup, lid and box. They describe different configurations. The optional steel straw is not separately identified in these weights, so confirm the final accessory and packing combination with your order.
What packing options are listed?
Two carton options are listed: 25 pieces in a 42 × 42 × 24.5cm carton with 9.3kg gross weight, or 50 pieces in a 42 × 42 × 46cm carton with 18kg gross weight. Individual white-box dimensions and carton net weights have not been supplied; confirm the final packaging layout during sampling.
Plan your custom order
Send the blank, accessory and packing requirements
Share quantities per color, your white-blank or finished-print plan, lid and straw configuration, packaging and destination market. Include cup-holder dimensions if fit is part of your purchasing specification.
MOQ 300 pcs. Final coating, accessory set and packing follow the approved sample and order specification.
