White studio sample shown with a logo print; listed colors are yellow, pink, purple and rose red.
1200 ml · large handle · custom logo
40 oz Cup with Handle: 1200ml Panda Tumbler with Dual-Drink Lid & Stainless Steel Straw
This 40 oz cup with handle holds 1200 ml. It carries BG Drinkware’s original panda character, a large handle for an easy grip, a dual-drink PP lid and a stainless steel straw with a panda dust cap. The inner wall is 304 stainless steel and the outer wall is 201 stainless steel. You can add your logo. The MOQ is 500 pieces per color.
- 1200 ml / about 40 oz
- Original panda design
- Dual-drink lid
- 500 pcs per color
- Inner wall
- 304 stainless steel
- Outer wall
- 201 stainless steel
- Lid & straw
- PP lid; stainless steel straw with panda dust cap
- Logo methods
- Laser, screen print, UV, hot stamping, heat transfer
Panda design: The panda is our own original character, created by BG Drinkware. It is not a licensed character from another brand.
Design
A 1200ml panda tumbler built around a big handle
The large handle gives a full-hand grip on a full 40 oz cup. The dual-drink lid gives you a straw or a direct sip, and the tapered body sits in many car cup holders.
Large easy-grip handle
A wide fixed handle leaves room for the whole hand, so the full 1200 ml cup is easy to lift and carry.
Dual-drink lid
Drink through the stainless steel straw, or lift the flip cover and sip from the lid. A panda dust cap covers the straw tip.
Leak-resistant seal
The closed lid is designed to seal the cup. Tell us if your market needs a leak check, and we can agree it at the sample stage.
Panda design
Our original panda character
The panda print and the panda straw cap are BG Drinkware’s own design. The listed colors are yellow, pink, purple and rose red, each with the panda character on the body.
- Original character, no licensed IP
- Panda-shaped straw dust cap
- Add your logo alongside the panda
Dual drink
Straw or flip-cover sip
One PP lid, two ways to drink. Use the stainless steel straw, or lift the flip cover and drink from the sip opening. Close the cover and the straw cap before you carry the cup.
- Stainless steel straw
- Flip cover over the sip opening
- Panda cap on the straw tip
Straw cap
A dust cap on the straw
The panda dust cap is tethered to the lid. Lift it to drink through the straw, then press it back to cover the tip. Read more in our guide to straws for 40 oz tumblers.
Steel body
Stainless steel inside
The inner wall is 304 stainless steel and the outer wall is 201 stainless steel. The lid and straw come off for cleaning. Read about stainless steel drinkware or our 40 oz tumbler buyer guide.
Product data
40 oz cup with handle specifications
Figures as supplied by BG Drinkware, the manufacturer. Use them for quoting and freight planning.
| Specification | 1200 ml |
|---|---|
| Capacity | 1200 ml (about 40 oz) |
| Width including handle | 15.1 cm |
| Body diameter | 11.1 cm |
| Height (with lid) | 24.2 cm |
| Weight with lid | 540 g |
| Body material | Inner 304 / outer 201 stainless steel |
| Lid material | PP |
| Straw | Stainless steel, with panda dust cap |
| Drink modes | Straw + flip-cover sip opening (dual-drink lid) |
| Handle | Large fixed handle for an easy grip |
| Colors | Yellow, pink, purple, rose red |
| Pieces per carton | 25 pcs |
| Carton size | 77.5 × 58.5 × 29.5 cm |
| MOQ | 500 pcs per color |
Custom orders
Add your logo to the panda tumbler
Pick the color, then send your logo artwork. The MOQ is 500 pieces per color. Logo methods include laser engraving, screen printing, UV printing, hot stamping and heat transfer. We confirm the right method for your color and artwork with each order. See our customization options, laser engraving and screen printing.
- Capacity: 1200 ml (about 40 oz)
- Color (500 pcs minimum per color)
- Logo artwork, print position and preferred method
- Packaging requirements
- Target market and any leak-check needs
Buyer questions
40 oz cup with handle FAQ
What size is this 40 oz cup with handle?
One capacity: 1200 ml (about 40 oz). The cup measures 15.1 × 11.1 × 24.2 cm: width including the handle × body diameter × height with the lid. Weight with the lid is 540 g.
What is the panda design?
The panda is BG Drinkware’s own original character. The four color versions carry the panda print and the PANDA / LUCK wording shown in the photos, and the straw dust cap is shaped as a panda. You can add your logo as well.
What is the MOQ for a custom logo?
The MOQ is 500 pieces per color.
What is the cup made of?
The inner wall is 304 stainless steel and the outer wall is 201 stainless steel. The lid is PP. The straw is stainless steel.
How do you drink from it?
The dual-drink lid has two modes: sip through the stainless steel straw, or lift the flip cover and drink from the sip opening. A panda dust cap covers the straw tip when you are not drinking.
Is it leak-proof?
The lid is designed to seal when the straw cap and flip cover are closed correctly. Tell us if your market needs a leak check, and we can agree it at the sample stage.
Will it fit a car cup holder?
The body is tapered for many car cup holders. Holder openings differ by vehicle, so check the cup against your target holder at the sample stage. We do not promise fit for every car model.
Which colors are available?
The listed colors are yellow, pink, purple and rose red. The photos show yellow with a blue lid and handle, and pink, purple and rose red with black lids and handles. Confirm the exact color details when you order.
Which logo methods are available?
Methods include laser engraving, screen printing, UV printing, hot stamping and heat transfer. We confirm which method suits your cup color and artwork when you order.
Are samples free?
No. Samples are charged, and the sample fee is deducted from your bulk order.
How is it packed?
Each carton holds 25 pcs and measures 77.5 × 58.5 × 29.5 cm.
Request a quote
Tell us your color, quantity and logo
Send the quantity per color, your logo file, packaging needs and target market. BG Drinkware will reply with a quote. Samples are charged; the sample fee is deducted from your bulk order.
MOQ 500 pieces per color. Samples are charged and the fee is deducted from your bulk order. Final print, color and packing details follow the approved sample.
